xFROG ST2W +OCTO +SPG

A diving regulator is a pressure regulator that controls the pressure of breathing gas during a dive. The most common use is to reduce compressed breathing gas to ambient pressure and deliver it to the diver, but there are other types of gas pressure regulators used for diving applications.

A regulator is one of the most important pieces of equipment used during a dive. Dive regulators allow the diver to breathe air from the cylinder at a lower pressure level.

S2 First stage + T2 Second stage + T2 Octopus + SPG

Standard hoses:

- 0.75m LP braided hose

- LP braided hose 0.95 m long

- HP rubber hose 0.80 m

Technical information ST2:

- Relieved first stage piston type regulator

- Connector: DIN

- LP ports are rotatable

- Intermediate pressure: (8.5-9.5 bar).

- High pressure port: (7/16″ 20W UNF-2B) x 2.

- Low pressure port: (3/8″ 24W UNF-2B) x 5.

- Weight (oz/g): 21/595.

- Main materials: 316 stainless steel body, SUS springs.

- Balanced, adjustable second stage regulator.

- Intermediate pressure: 10 Bar/150 PSI.

- Inspiratory effort: 1.2-1.5 CIW (column inches of water)

- Pneumatically relieved design provides constant gas pressure for easy inhalation

- Convenient dive/pre-dive switch avoids surface slack and is easy to use with gloves on.

- Adjustable design helps the diver adjust the burst pressure so that the breathing resistance matches the diver's personal preference.

- Second stage adjustment knob: allows fine adjustment of inspiratory effort.

- Weight: 237 g (0.52 lbs)

- Faceplate color: white

- Main materials: GF Enhanced PA, SUS 316 main body.

- Silicone mouthpiece approved for food contact

Length of low-pressure hoses: 75 cm (30")

Material of low pressure hoses: rubber / braided + stainless steel fittings

First stage connector: 3/8"-24w

Second stage connector: 9/16"-18w

Working pressure: 30 bar / 430 psi

Color: White