EEZYCUT cutting tool

The set includes:

- eezycut in holster,

- two replaceable blades.

Operation and maintenance:

- before using the Eezycut in salt water, lubricate the blade with silicone grease, which will greatly extend its use,

- the holster should be rinsed separately,

- the blade must be replaced when it has been worn out or the cutting properties have deteriorated,

- the tool should be rinsed in fresh water after each use in salt water.

How to use Eezycut:

Use the Eezycut each time by holding the handle. Never hold or lift the device inside where there is an open blade, you may get hurt. It is always necessary to see that the device is mounted correctly, and that pulling the knife out of the holster will not cause damage (cutting other devices).

Warnings and precautions

Incompetent and improper use of the Eezycut can cause injury. Use it prudently and judiciously due to the sharp blade (the maximum thickness of the rope you want to cut counts 8mm). Never give the Eezycut to children to play with and leave it within their reach.< Bending the blade can break the blade and damage the body.

How to replace the blade?

Take special care when replacing sharp blades. It is advisable to use cut-resistant gloves.

Using a screwdriver, remove the two screws from the Eezycut and very carefully replace the blade with a new one,

keeping in mind that it is very but very sharp. Then screw the screws back in.